Ada Restroom Sign Height
Ada requirements specify a size range for text height of 5 8 2 inches.
Ada restroom sign height. Wall mounted signs must also be centered in the 18 inch horizontal space immediately next to the door. Room signs must be no higher than 5 feet. Ada standards for accessible design can be downloaded from www ada. Ada accessibility guidelines adaag section 4 30 6 the law requires that signs be centered at 60 inches maximum above the finished floor or ground surface.
For information about the ada including the revised 2010 ada regulations please visit the department s website www ada gov. Use this chart to help you determine how much text will fit on a sign. Exceptions to the mounting rules are situations like double doors or doors where no wall space is available. As with most government documents interpreting the ada sign mounting height requirements can be somewhat subjective and open to interpretation.
Specific questions call the toll free ada information line at 800 514 0301 voice or 800 514 0383. Install signs with double sided tape by removing the tape backing. Tactile characters on signs shall be located 48 inches 1220 mm minimum above the finish floor or ground surface measured from the baseline of the lowest tactile character and 60 inches 1525 mm maximum above the finish floor or ground surface measured from the baseline of the highest tactile character. The simplest approach is as follows.
Must be 48 minimum and 60 maximum measured from the finished floor to the bottom line of text. Ada bathroom wall sign installation height requirements. This allows signs of different sizes to be mounted on the same visual plane. Braille you need to leave a minimum of 3 8 inch clearance on all side of braille.
These ada sign instructions indicate the height and location requirements for braille signage to permanently identify rooms and space. Ada sign mounting height requirements the baseline of the tactile copy can be mounted between 48 at the lowest point to 60 at the highest point. Must be mounted on the latch side of the door. Install your braille signs on the latch side of the door no lower than 48 inches from the floor and no higher than 60 inches from the floor.
Ada sign height and location mounting the ada specifies that wall signs must be mounted so that the bottom line of braille is at least 48 inches high and raised characters are at most 60 inches high.